Go to the documentation of this file.
48 #define _XOPEN_SOURCE 600
53 #include <libcrystalhd/bc_dts_types.h>
54 #include <libcrystalhd/bc_dts_defs.h>
55 #include <libcrystalhd/libcrystalhd_if.h>
69 #define OUTPUT_PROC_TIMEOUT 50
71 #define TIMESTAMP_UNIT 100000
107 {
"crystalhd_downscale_width",
108 "Turn on downscaling to the specified width",
124 return BC_MSUBTYPE_DIVX;
126 return BC_MSUBTYPE_DIVX311;
128 return BC_MSUBTYPE_MPEG2VIDEO;
130 return BC_MSUBTYPE_VC1;
132 return BC_MSUBTYPE_WMV3;
134 return BC_MSUBTYPE_H264;
136 return BC_MSUBTYPE_INVALID;
148 output->PicInfo.timeStamp);
150 output->PicInfo.picture_number);
156 output->PicInfo.chroma_format);
158 output->PicInfo.pulldown);
162 output->PicInfo.frame_rate);
164 output->PicInfo.aspect_ratio);
166 output->PicInfo.colour_primaries);
168 output->PicInfo.picture_meta_payload);
170 output->PicInfo.sess_num);
174 output->PicInfo.custom_aspect_ratio_width_height);
178 output->PicInfo.other.h264.valid);
191 "Unable to allocate new node in OpaqueList.\n");
196 priv->
head = newNode;
201 priv->
tail = newNode;
220 "CrystalHD: Attempted to query non-existent timestamps.\n");
258 "CrystalHD: Couldn't match fake_timestamp.\n");
275 DtsFlushInput(priv->
dev, 4);
285 DtsStopDecoder(device);
286 DtsCloseDecoder(device);
287 DtsDeviceClose(device);
306 BC_INPUT_FORMAT
format = {
309 .OptFlags = 0x80000000 | vdecFrameRate59_94 | 0x40,
310 .width = avctx->
width,
314 BC_MEDIA_SUBTYPE subtype;
316 uint32_t
mode = DTS_PLAYBACK_MODE |
317 DTS_LOAD_FILE_PLAY_FW |
318 DTS_SKIP_TX_CHK_CPB |
319 DTS_PLAYBACK_DROP_RPT_MODE |
320 DTS_SINGLE_THREADED_MODE |
321 DTS_DFLT_RESOLUTION(vdecRESOLUTION_1080p23_976);
335 case BC_MSUBTYPE_H264:
338 case BC_MSUBTYPE_VC1:
339 case BC_MSUBTYPE_WVC1:
340 case BC_MSUBTYPE_WMV3:
341 case BC_MSUBTYPE_WMVA:
342 case BC_MSUBTYPE_MPEG2VIDEO:
343 case BC_MSUBTYPE_DIVX:
344 case BC_MSUBTYPE_DIVX311:
352 format.mSubtype = subtype;
355 format.bEnableScaling = 1;
363 if (
ret != BC_STS_SUCCESS) {
369 if (
ret != BC_STS_SUCCESS) {
371 "CrystalHD: DtsCrystalHDVersion failed\n");
377 (subtype == BC_MSUBTYPE_DIVX || subtype == BC_MSUBTYPE_DIVX311)) {
379 "CrystalHD: BCM70012 doesn't support MPEG4-ASP/DivX/Xvid\n");
384 if (
ret != BC_STS_SUCCESS) {
389 ret = DtsOpenDecoder(priv->
dev, BC_STREAM_TYPE_ES);
390 if (
ret != BC_STS_SUCCESS) {
395 ret = DtsSetColorSpace(priv->
dev, OUTPUT_MODE422_YUY2);
396 if (
ret != BC_STS_SUCCESS) {
400 ret = DtsStartDecoder(priv->
dev);
401 if (
ret != BC_STS_SUCCESS) {
405 ret = DtsStartCapture(priv->
dev);
406 if (
ret != BC_STS_SUCCESS) {
426 BC_DTS_STATUS decoder_status = { 0, };
432 uint8_t bottom_field = (
output->PicInfo.flags & VDEC_FLAG_BOTTOMFIELD) ==
433 VDEC_FLAG_BOTTOMFIELD;
434 uint8_t bottom_first = !!(
output->PicInfo.flags & VDEC_FLAG_BOTTOM_FIRST);
444 if (
output->PicInfo.timeStamp != 0) {
459 output->PicInfo.timeStamp);
462 ret = DtsGetDriverStatus(priv->
dev, &decoder_status);
463 if (
ret != BC_STS_SUCCESS) {
465 "CrystalHD: GetDriverStatus failed: %u\n",
ret);
476 if (!
frame->data[0]) {
490 else if (
width <= 1280)
500 dStride =
frame->linesize[0];
501 dst =
frame->data[0];
512 *((uint32_t *)
src) = *((uint32_t *)(
src + sStride));
527 for (sY = 0; sY <
height; dY++, sY++) {
528 memcpy(&(dst[dY * dStride]), &(
src[sY * sStride]), bwidth);
537 frame->top_field_first = !bottom_first;
539 frame->pts = pkt_pts;
542 frame->pkt_pts = pkt_pts;
547 frame->pkt_duration = 0;
548 frame->pkt_size = -1;
564 BC_DTS_PROC_OUT
output = {
565 .PicInfo.width = avctx->
width,
566 .PicInfo.height = avctx->
height,
575 if (
ret == BC_STS_FMT_CHANGE) {
579 switch (
output.PicInfo.aspect_ratio ) {
580 case vdecAspectRatioSquare:
583 case vdecAspectRatio12_11:
586 case vdecAspectRatio10_11:
589 case vdecAspectRatio16_11:
592 case vdecAspectRatio40_33:
595 case vdecAspectRatio24_11:
598 case vdecAspectRatio20_11:
601 case vdecAspectRatio32_11:
604 case vdecAspectRatio80_33:
607 case vdecAspectRatio18_11:
610 case vdecAspectRatio15_11:
613 case vdecAspectRatio64_33:
616 case vdecAspectRatio160_99:
619 case vdecAspectRatio4_3:
622 case vdecAspectRatio16_9:
625 case vdecAspectRatio221_1:
630 }
else if (
ret == BC_STS_SUCCESS) {
632 if (
output.PoutFlags & BC_POUT_FLAGS_PIB_VALID) {
647 }
else if (
ret == BC_STS_BUSY) {
665 if (avpkt && avpkt->
size) {
683 "input \"pts\": %"PRIu64
"\n",
pts);
684 bc_ret = DtsProcInput(dev, avpkt->
data, avpkt->
size,
pts, 0);
685 if (bc_ret == BC_STS_BUSY) {
687 "CrystalHD: ProcInput returned busy\n");
690 }
else if (bc_ret != BC_STS_SUCCESS) {
692 "CrystalHD: ProcInput failed: %u\n",
ret);
710 BC_DTS_STATUS decoder_status = { 0, };
725 while (
pkt.
size > DtsTxFreeSize(dev)) {
745 bc_ret = DtsGetDriverStatus(dev, &decoder_status);
746 if (bc_ret != BC_STS_SUCCESS) {
751 if (decoder_status.ReadyListCount == 0) {
763 }
else if (got_frame == 0) {
770 #define DEFINE_CRYSTALHD_DECODER(x, X, bsf_name) \
771 static const AVClass x##_crystalhd_class = { \
772 .class_name = #x "_crystalhd", \
773 .item_name = av_default_item_name, \
775 .version = LIBAVUTIL_VERSION_INT, \
777 AVCodec ff_##x##_crystalhd_decoder = { \
778 .name = #x "_crystalhd", \
779 .long_name = NULL_IF_CONFIG_SMALL("CrystalHD " #X " decoder"), \
780 .type = AVMEDIA_TYPE_VIDEO, \
781 .id = AV_CODEC_ID_##X, \
782 .priv_data_size = sizeof(CHDContext), \
783 .priv_class = &x##_crystalhd_class, \
786 .receive_frame = crystalhd_receive_frame, \
789 .capabilities = AV_CODEC_CAP_DELAY | AV_CODEC_CAP_AVOID_PROBING | AV_CODEC_CAP_HARDWARE, \
790 .pix_fmts = (const enum AVPixelFormat[]){AV_PIX_FMT_YUYV422, AV_PIX_FMT_NONE}, \
791 .wrapper_name = "crystalhd", \
794 #if CONFIG_H264_CRYSTALHD_DECODER
798 #if CONFIG_MPEG2_CRYSTALHD_DECODER
802 #if CONFIG_MPEG4_CRYSTALHD_DECODER
806 #if CONFIG_MSMPEG4_CRYSTALHD_DECODER
810 #if CONFIG_VC1_CRYSTALHD_DECODER
814 #if CONFIG_WMV3_CRYSTALHD_DECODER
static const AVOption options[]
void av_packet_unref(AVPacket *pkt)
Wipe the packet.
#define FF_ENABLE_DEPRECATION_WARNINGS
int ff_decode_get_packet(AVCodecContext *avctx, AVPacket *pkt)
Called by decoders to get the next packet for decoding.
#define AV_LOG_WARNING
Something somehow does not look correct.
Filter the word “frame” indicates either a video frame or a group of audio as stored in an AVFrame structure Format for each input and each output the list of supported formats For video that means pixel format For audio that means channel sample they are references to shared objects When the negotiation mechanism computes the intersection of the formats supported at each end of a all references to both lists are replaced with a reference to the intersection And when a single format is eventually chosen for a link amongst the remaining all references to the list are updated That means that if a filter requires that its input and output have the same format amongst a supported all it has to do is use a reference to the same list of formats query_formats can leave some formats unset and return AVERROR(EAGAIN) to cause the negotiation mechanism toagain later. That can be used by filters with complex requirements to use the format negotiated on one link to set the formats supported on another. Frame references ownership and permissions
#define AV_OPT_FLAG_VIDEO_PARAM
#define AVERROR_EOF
End of file.
filter_frame For filters that do not use the this method is called when a frame is pushed to the filter s input It can be called at any time except in a reentrant way If the input frame is enough to produce output
This structure describes decoded (raw) audio or video data.
#define AV_LOG_VERBOSE
Detailed information.
static BC_MEDIA_SUBTYPE id2subtype(CHDContext *priv, enum AVCodecID id)
void av_image_copy_plane(uint8_t *dst, int dst_linesize, const uint8_t *src, int src_linesize, int bytewidth, int height)
Copy image plane from src to dst.
const struct AVCodec * codec
static CopyRet copy_frame(AVCodecContext *avctx, BC_DTS_PROC_OUT *output, AVFrame *frame, int *got_frame)
#define AV_LOG_TRACE
Extremely verbose debugging, useful for libav* development.
#define AV_LOG_ERROR
Something went wrong and cannot losslessly be recovered.
#define OUTPUT_PROC_TIMEOUT
Timeout parameter passed to DtsProcOutput() in us.
Filter the word “frame” indicates either a video frame or a group of audio as stored in an AVFrame structure Format for each input and each output the list of supported formats For video that means pixel format For audio that means channel sample format(the sample packing is implied by the sample format) and sample rate. The lists are not just lists
uint64_t reordered_opaque
Describe the class of an AVClass context structure.
@ AV_PIX_FMT_YUYV422
packed YUV 4:2:2, 16bpp, Y0 Cb Y1 Cr
Rational number (pair of numerator and denominator).
static CopyRet receive_frame(AVCodecContext *avctx, AVFrame *frame, int *got_frame)
static av_cold int init(AVCodecContext *avctx)
static uint64_t opaque_list_push(CHDContext *priv, uint64_t reordered_opaque)
AVCodecID
Identify the syntax and semantics of the bitstream.
int ff_get_buffer(AVCodecContext *avctx, AVFrame *frame, int flags)
Get a buffer for a frame.
#define AV_NOPTS_VALUE
Undefined timestamp value.
static int crystalhd_decode_packet(AVCodecContext *avctx, const AVPacket *avpkt)
static OpaqueList * opaque_list_pop(CHDContext *priv, uint64_t fake_timestamp)
#define AVERROR_EXTERNAL
Generic error in an external library.
#define AV_LOG_INFO
Standard information.
int av_image_get_linesize(enum AVPixelFormat pix_fmt, int width, int plane)
Compute the size of an image line with format pix_fmt and width width for the plane plane.
#define DEFINE_CRYSTALHD_DECODER(x, X, bsf_name)
int64_t pts
Presentation timestamp in AVStream->time_base units; the time at which the decompressed packet will b...
uint8_t * extradata
some codecs need / can use extradata like Huffman tables.
#define AV_OPT_FLAG_DECODING_PARAM
a generic parameter which can be set by the user for demuxing or decoding
void * av_mallocz(size_t size)
Allocate a memory block with alignment suitable for all memory accesses (including vectors if availab...
const char * name
Name of the codec implementation.
enum AVPixelFormat pix_fmt
Pixel format, see AV_PIX_FMT_xxx.
these buffered frames must be flushed immediately if a new input produces new the filter must not call request_frame to get more It must just process the frame or queue it The task of requesting more frames is left to the filter s request_frame method or the application If a filter has several the filter must be ready for frames arriving randomly on any input any filter with several inputs will most likely require some kind of queuing mechanism It is perfectly acceptable to have a limited queue and to drop frames when the inputs are too unbalanced request_frame For filters that do not use the this method is called when a frame is wanted on an output For a it should directly call filter_frame on the corresponding output For a if there are queued frames already one of these frames should be pushed If the filter should request a frame on one of its repeatedly until at least one frame has been pushed Return or at least make progress towards producing a frame
main external API structure.
#define FF_DISABLE_DEPRECATION_WARNINGS
static int crystalhd_receive_frame(AVCodecContext *avctx, AVFrame *frame)
#define TIMESTAMP_UNIT
Step between fake timestamps passed to hardware in units of 100ns.
This structure stores compressed data.
int width
picture width / height.
static void flush(AVCodecContext *avctx)
static av_cold int uninit(AVCodecContext *avctx)
@ AV_CODEC_ID_MPEG2VIDEO
preferred ID for MPEG-1/2 video decoding
static void print_frame_info(CHDContext *priv, BC_DTS_PROC_OUT *output)
AVRational sample_aspect_ratio
sample aspect ratio (0 if unknown) That is the width of a pixel divided by the height of the pixel.
uint8_t need_second_field